TMS320LF2401 FEATURES
    High-Performance Static CMOS Technology
　　- 25-ns Instruction Cycle Time (40 MHz)
　　- 40-MIPS Performance
　　- Low-Power 3.3-V Design
　　 Based on TMS320C2xx DSP CPU Core
　　- Code-Compatible With 240x and F243/F241/C242
　　- Instruction Set Compatible With F240/C240
　　 On-Chip Memory
　　- Up to 8K Words x 16 Bits of Flash EEPROM (2 Sectors) (LF2401A)
　　- 8K Words x 16 Bits of ROM (LC2401A)
　　- Programmable ode-Security?Feature for the On-Chip Flash/ROM
　　- Up to 1K Words x 16 Bits of Data/Program RAM
　　- 544 Words of Dual-Access RAM
　　- Up to 512 Words of Single-Access RAM
　　 Boot ROM
　　- SCI Bootloader
　　 Event-Manager (EV) Module (EVA), Which Includes:
　　- Two 16-Bit General-Purpose Timers
　　- Seven 16-Bit Pulse-Width Modulation(PWM) Channels Which Enable:
　　- Three-Phase Inverter Control
　　- Center- or Edge-Alignment of PWM Channels
　　- Emergency PWM Channel Shutdown With External PDPINTA Pin
　　- Programmable Deadband (Deadtime) Prevents Shoot-Through Faults
　　- One Capture Unit for Time-Stamping of External Events
　　- Input Qualifier for Select Pins
　　- Synchronized A-to-D Conversion
　　- Designed for AC Induction, BLDC,Switched Reluctance, and Stepper Motor Control
　　 Small Foot-Print (7 mm ?7 mm) Ideally Suited for Space-Constrained Applications
　　 Watchdog (WD) Timer Module
　　 10-Bit Analog-to-Digital Converter (ADC)
　　- 5 Multiplexed Input Channels
　　- 500 ns Minimum Conversion Time
　　- Selectable Twin 8-State Sequencers Triggered by Event Manager
　　 Serial Communications Interface (SCI)
　　 Phase-Locked-Loop (PLL)-Based Clock Generation
　　 Up to 13 Individually Programmable,Multiplexed General-Purpose Input/Output(GPIO) Pins
　　 User-Selectable Dual External Interrupts(XINT1 and XINT2)
　　 Power Management:
　　- Three Power-Down Modes
　　- Ability to Power Down Each Peripheral Independently
　　 Real-Time JTAG-Compliant Scan-Based Emulation, IEEE Standard 1149.1?(JTAG)
　　 Development Tools Include:
　　- Texas Instruments (TI) ANSI C Compiler,Assembler/Linker, and Code Composer Studio. Debugger
　　- Evaluation Modules
　　- Scan-Based Self-Emulation (XDS510.)
　　- Broad Third-Party Digital Motor Control Support
　　 32-Pin VF Low-Profile Quad Flatpack (LQFP)
　　 Temperature Range: - 40℃ to 85 ℃